Dell PowerVault DX6112 Owner's Manual - Page 49
Installing A Cooling Fan, Removing The Cooling-Fan Assembly
View all Dell PowerVault DX6112 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing A Cooling Fan CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Open the system. 2. Align the plug at the base of the cooling fan with the connector on the system board. 3. Slide the cooling fan into the securing slots until the tabs lock into place. 4. Close the system. Removing The Cooling-Fan Assembly CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals. 2. Open the system. 3. Unlock the cooling-fan assembly from the chassis by rotating the blue release lever upward. 4. Lift the cooling-fan assembly out of the chassis. Figure 17. Removing and Installing the Cooling-Fan Assembly 49