Dell PowerVault MD1000 Information Update - Page 3
RAID Configuration Update, Supported Hardware Configurations Using a PERC 6/E Adapter - drives
View all Dell PowerVault MD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
RAID Configuration Update Host-based RAID configuration is supported using Dell PowerEdge RAID Controller (PERC) 5/E and PERC 6/E. Supported Hardware Configurations Using a PERC 6/E Adapter PERC 6/E adapters can detect and use redundant paths to drives in a Dell PowerVault MD1000 enclosure. With redundant paths, if one path fails, another path can be used to communicate between the controller and the hard drive. NOTE: Redundant path connectivity is not supported on PERC 5/E adapters. Figure 1 Redundant Path With One Enclosure Server PowerVault MD1000 storage enclosure Information Update 3
Information Update
3
RAID Configuration Update
Host-based RAID configuration is supported using Dell PowerEdge RAID
Controller (PERC) 5/E and PERC 6/E.
Supported Hardware Configurations Using a
PERC 6/E Adapter
PERC 6/E adapters can detect and use redundant paths to drives in a Dell
PowerVault MD1000 enclosure. With redundant paths, if one path fails,
another path can be used to communicate between the controller and the
hard drive.
NOTE:
Redundant path connectivity is not supported on PERC 5/E adapters.
Figure 1
Redundant Path With One Enclosure
Server
PowerVault
MD1000 storage
enclosure