Dell PowerVault MD1000 Rack Installation Guide - Page 14
Installing the Mounting Rails in the Rack, Installing the RapidRails Mounting Rails
View all Dell PowerVault MD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installing the Mounting Rails in the Rack Installing the RapidRails Mounting Rails 1 At the front of the rack cabinet, position one of the RapidRails mounting rails so that its mountingbracket flange fits between the marks or tape you placed (or numbered location) on the vertical rails (see Figure 1-5). The top mounting hook on the front mounting-bracket flange should enter the top hole between the marks you made on the vertical rails. 2 Push the mounting rail forward until the two mounting hooks enter their square holes. Then, push down on the mounting-bracket flange until the mounting hooks seat and the blue tab on the top mounting hook pops out and clicks (see Figure 1-5). 3 At the back of the cabinet, pull back on the mounting-bracket flange until the mounting hooks enter their square holes. Then, push down on the flange until the mounting hooks seat and the blue tab pops out and clicks. 4 Repeat step 1 through step 3 for the mounting rail on the other side of the rack. 5 Ensure that the mounting rails are mounted at the same vertical position on both sides of the rack. 12 Rack Installation Guide