Dell PowerVault MD3000i User's Guide - Page 96
Downloading Both RAID Controller and NVSRAM Firmware, Support, Download firmware - firmware upgrade
View all Dell PowerVault MD3000i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Downloading Both RAID Controller and NVSRAM Firmware NOTE: I/O to the array can continue while you are upgrading RAID controller and NVSRAM firmware. NOTE: The RAID enclosure must contain at least two disk drives in order to update the firmware on the controller. Use the following procedure to download RAID controller and NVSRAM firmware in a single operation: 1 Click the Support tab, then click Download firmware. 2 From the Download firmware display, click Download RAID Controller Module Firmware. A dialog box lists the current controller firmware and NVSRAM versions in use. 3 Click Select File to browse to the file that you want to download. By default, only firmware images that are compatible with the current storage array configuration appear. 4 Click the file in the File Selection area and then click OK. 5 If the file you selected is not valid or is incompatible with the current storage array configuration, an error message appears. Click OK to close the error message, and select a compatible file. NOTE: If you wish to only download firmware for the RAID controller, skip to step 10 in this procedure. 6 Click the check box next to Transfer NVSRAM file with RAID controller module firmware. 7 Click Select File to browse to the file that you want to download. By default, only firmware images that are compatible with the current storage array configuration appear. 8 Click the file in the File Selection area and then click OK. 9 If the file you selected is not valid or is incompatible with the current storage array configuration, an error message appears. Click OK to close it, and select a compatible file. 10 Click Transfer... 96 Firmware Downloads