Dell PowerVault MD3200 Getting Started Guide - Page 7

Before You Begin Before setting up your Dell™ PowerVault™ MD32xx RAID enclosure, you must consider certain best practices to ensure that your RAID enclosure operates at maximum efficiency and offers full redundancy (if required). • Throughout the network, always use a Category 5e (or higher) Ethernet cable. • Before connecting any cables between the host server and storage array, physically label each port and connector. • Always follow proper power-up and power-down procedures when cycling power across the network. You must also ensure that critical network components are on separate power circuits. Other Documentation and Media You May Need WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be included within this document or as a separate document. NOTE: All PowerVault MD32xx documents are available at support.dell.com/manuals. • The rack documentation included with your rack solution describes how to install your system into a rack. • The Owner's Manual provides information about system features and describes how to troubleshoot the system and install or replace system components. • The Deployment Guide provides information about installing and configuring the software and hardware. • The CLI Guide provides information about using the command line interface (CLI) to configure and manage your storage array. Getting Started With Your System 5