Dell PowerVault MD3220i CLI Guide - Page 25

When the CLI encounters either type of error, it writes information describing the error directly to the command line and sets a return code. Depending on the return code, the CLI might also write additional information about which parameter caused the error. The CLI also writes information about what command syntax was expected to help you identify any syntax errors you might have entered. When an exception occurs while executing a command, the CLI automatically saves the error information to a file named excprpt.txt. The CLI attempts to place excprpt.txt in the directory specified by the system property devmgr.datadir, which by default is the "client/data" directory under the main installation directory in Windows and the /var/opt/SM directory in Linux. If for any reason the CLI cannot place the file in the devmgr.datadirspecified directory, the CLI saves the excprpt.txt file in the same directory from which the CLI is running. You cannot change the file name or location. The excprpt.txt file is overwritten every time an exception occurs. To save the information in the excprpt.txt file, you must to copy the information to a new file or directory. Exit Status After you run a CLI command or a CLI and script command, status is displayed that indicates the success of the operation defined by the command. The status values are shown in Table 1-3. Table 1-3. Exit Status Status Value 0 1 2 3 4 5 6 7 Meaning The command terminated without an error. The command terminated with an error. Error information is also displayed. The script file does not exist. An error occurred while opening an output file. A storage array is not at the specified address. Addresses specify different storage arrays. A storage array name does not exist for the host agent connected. The storage array name was not at the specified address. About the Command Line Interface 25