Dell PowerVault MD3260 Support Matrix - Page 5
Default IPv4 settings for the Management Ports on the MD3260/3260i/3660i/3660f arrays
![]() |
View all Dell PowerVault MD3260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Default IPv4 settings for the Management Ports on the MD3260/3260i/3660i/3660f arrays NOTE: No default gateway is set. By default, the management ports on the storage array are set to DHCP. If DHCP fails, the following IPv4 settings will be used: Controller/Port Controller 0 Controller 1 IPv4 address 192.168.128.101 192.168.128.102 Subnet Mask 255.255.255.0 255.255.255.0 Default IPv4 settings for the iSCSI Ports on MD3260i and MD3660i arrays NOTE: No default gateway is set. By default, the iSCSI ports on the storage array are set to the following static IPv4 settings: Controller/Port (MD3660i) Controller 0, Port 0 Controller 0, Port 1 Controller 1, Port 0 Controller 1, Port 1 IPv4 address 192.168.130.101 192.168.131.101 192.168.130.102 192.168.131.102 Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 Port # 3260 3260 3260 3260 Controller/Port (MD3260i) Controller 0, Port 0 Controller 0, Port 1 Controller 0, Port 2 Controller 0, Port 3 Controller 1, Port 0 Controller 1, Port 1 Controller 1, Port 2 Controller 1, Port 3 IPv4 address 192.168.130.101 192.168.131.101 192.168.132.101 192.168.133.101 192.168.130.102 192.168.131.102 192.168.132.102 192.168.133.102 Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0 Port # 3260 3260 3260 3260 3260 3260 3260 3260 5
![](/manual_guide/products/dell-powervault-md3060e-support-matrix-58518b2/5.png)