Dell PowerVault TL2000 SCSI Reference Guide - Page 21
Supported, Vital, Product - firmware update
View all Dell PowerVault TL2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Vendor Identification: Eight byte ASCII string. This field is set to: 0 1 2 3 4 5 6 7 I B M Product Identification: Sixteen byte ASCII string. This field depends on the library model. This field is set to: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 5 7 3 - T L Product Revision Level: This field contains 4 bytes of ASCII data that provides the media changer's software revision levels. When a firmware update is performed on the media changer, this part of the revision level changes to reflect that update. BarC: When set this bit indicates that the library is equipped with a bar code scanner. IUS: Information Units Supported. Set to 0 indicating information units are not supported. QAS: Quick Arbitrate Supported. Set to 0 indicating QAS is not supported. Clocking: Indicates the level of data clocking supported. Set to 11b if the host interface speed has not been set to limit transfers to 80MB/s. Set to 00b when the host interface speed has been set to limit transfers to 80 MB/s. Version Descriptors: The version descriptors report the identifier of the supported SCSI command sets. Supported Vital Product Data page (00h) The Supported Vital Product Data VPD page provides a directory of the Vital Product Data Pages that are supported by the media changer. Bit 7 6 5 4 3 2 1 0 Byte 0 Peripheral Qualifier (0) Peripheral Device Type (8) 1 Page Code (00h) 2 Reserved 3 Page Length (04h) 4 00h - (this page) 5 80h - Unit Serial Number Page 6 83h - Device Identification Page 7 C0h - Firmware Build Information Page 8 D0h - Vendor Specific Page 9 FFh - Vendor Use Only Note: If an unsupported LUN was initially specified, the Peripheral Qualifier will return 3h and the Peripheral Device Type will return 1Fh. Chapter 3. Supported SCSI Commands 3-7