Dell Precision 3530 Service Manual - Page 28
Power connector port, Removing the power connector port
 |
View all Dell Precision 3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. Connect the heat sink assembly to the connector on the system board. 4. Install the: a) battery b) base cover 5. Follow the procedure in After working inside your computer. Power connector port Removing the power connector port 1. Follow the procedure in Before working inside your computer. 2. Remove the: a) base cover b) battery 3. To remove the power connector port: a) Disconnect the power connector port cable from the connector on the system board [1]. NOTE: Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage. b) Remove the M2x3 screw to release the metal bracket that secures the power connector port [2]. c) Remove the metal bracket that secures the power connector port [3]. d) Lift the power connector port away from the laptop [4]. Installing the power connector port 1. Insert the power connector port into the slot on the laptop. 28 Disassembly and reassembly
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23 -
24 -
25 -
26 -
27 -
28 -
29 -
30 -
31 -
32 -
33 -
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
 |
 |
