Dell Precision 5530 2 in 1 Precision 5530 2-in-1 Setup and specifications guid - Page 30
Power management
View all Dell Precision 5530 2 in 1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Option Intel TurboBoost Hyper-Thread Control Description Allows you to enable or disable the Intel TurboBoost mode of the processor. • Enable Intel TurboBoost This option is set by default. Allows you to enable or disable the HyperThreading in the processor. • Disabled • Enabled-Default Power management Option Description AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default setting: Wake on AC is not selected. Enable Intel Speed • Enable Intel Speed Shift Technology Shift Technology Default setting: Enabled Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled • Every Day • Weekdays • Select Days Default setting: Disabled USB Wake Support Allows you to enable USB devices to wake the system from Standby. NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power. • Enable USB Wake Support • Wake on Dell USB-C dock-enabled Wireless Radio Control Allows the system to sense the connection to a wired network and subsequently disable the selected wireless radios (WLAN and/or WWAN). • Control WLAN radio Default setting: This option is disabled. Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. • Disabled • WLAN Default setting: Disabled Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment. Block Sleep (S3 state) Default setting: This option is disabled Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you enable this option, your system runs only in battery even if the AC is attached. • Enable peak shift-is disabled • Set battery threshold (15% to 100%) - 15 % (enabled by default) 30 System setup