Dell Precision 5530 Service Manual - Page 28

Power connector port, Audio board, Removing Audio board - power adapter

Get Dell Precision 5530 PDF manuals and user guides View all Dell Precision 5530 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Power connector port Removing the DC-in Connector 1 Follow the procedures in Before Working Inside Your Computer. 2 Remove the: a base cover b battery 3 Perform the following steps to remove the I/O board: a Disconnect the DC-in cable from the connector to the system board [1]. b Remove the M2x3 screw that secures the DC-in connector to the computer [2]. c Lift the DC-in connector from the computer [3]. Installing the DC-in Adapter Port 1 Place the DC-in adapter port into the slot on the palm-rest assembly. 2 Route the power-adapter port cable through its routing guides on the palm-rest assembly. 3 Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly. 4 Connect the power-adapter port cable to the system board. 5 Install the: a Battery b Base cover 6 Follow the procedures in After Working Inside Your Computer. Audio board Removing Audio board 1 Follow the procedures in Before Working Inside Your Computer. 2 Remove the: 28 Disassembly and reassembly

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Power connector port
Removing the DC-in Connector
1
Follow the procedures in
Before Working Inside Your Computer
.
2
Remove the:
a
base cover
b
battery
3
Perform the following steps to remove the I/O board:
a
Disconnect the DC-in cable from the connector to the system board [1].
b
Remove the M2x3 screw that secures the DC-in connector to the computer [2].
c
Lift the DC-in connector from the computer [3].
Installing the DC-in Adapter Port
1
Place the DC-in adapter port into the slot on the palm-rest assembly.
2
Route the power-adapter port cable through its routing guides on the palm-rest assembly.
3
Replace the M2x3 screw that secures the power-adapter port to the palm-rest assembly.
4
Connect the power-adapter port cable to the system board.
5
Install the:
a
Battery
b
Base cover
6
Follow the procedures in
After Working Inside Your Computer
.
Audio board
Removing Audio board
1
Follow the procedures in
Before Working Inside Your Computer
.
2
Remove the:
28
Disassembly and reassembly