Dell Precision 620 System Documentation Update (Memory Upgrade) - Page 12
Installing a RIMM,
View all Dell Precision 620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
15. Run the Dell Diagnostics to verify that the memory modules are operating properly. NOTE: For information on troubleshooting and running the Dell Diagnostics, see "Troubleshooting" in the User's Guide. Installing a RIMM NOTICE: Before you upgrade RIMMs, you must upgrade the BIOS. See "Upgrading the BIOS" on page 1 for instructions. If a RIMM is already installed in the socket you want to use, you must remove it. For instructions, see "Removing a RIMM" on page 9. To install a RIMM, perform the following steps (see Figure 2): 1. Locate the plastic securing clips at each end of the socket. Press the clips outward until they snap open. NOTICE: To avoid damage to the memory module, press the module straight down into the socket with equal force applied at each end of the module. 2. Press the memory module straight into the socket until the securing tabs snap into place around the ends of the memory module. securing clips (2) Figure 2. Installing a RIMM 8 System Memory Upgrade socket