Dell Precision M4400 Intel® Active Management Technology v4.0 Adminis - Page 27

Intel AMT Configurations Example in Static Mode

Get Dell Precision M4400 PDF manuals and user guides View all Dell Precision M4400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer in static mode. The computer requires two MAC addresses (GBE MAC address and Manageability MAC Address) to operate in static mode. If there is no Manageability MAC address, Intel AMT cannot be set in static mode. Intel AMT Configurations Example in Static Mode Intel AMT Configuration Parameters Values Intel AMT Configuration Select and press Host Name Example: IntelAMT Set the parameters as follows: TCP/IP Enable Network interface Disable DHCP Mode Set an IP address (e.g., 192.168.0.15) Set a subnet mask (e.g., 255.255.255.0) The default gateway address is optional The preferred DNS address is optional The Alternate DNS address is optional Set the domain name (e.g., amt.intel.com) Provision Model Intel AMT 4.0 Mode Small Business SOL/IDE-R Enable SOL Enable IDE-R Remote FW Update Enabled Save and exit MEBx and then boot computer to the Windows operating system. * Information on this page provided by Intel. Back to Contents Page

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
The table below shows a basic field settings example for the
Intel AMT Configuration
menu page to configure the computer
in static mode. The computer requires two MAC addresses (GBE MAC address and Manageability MAC Address) to operate in
static mode. If there is no Manageability MAC address, Intel AMT cannot be set in static mode.
Intel AMT Configurations Example in Static Mode
Intel AMT Configuration Parameters
Values
Intel AMT Configuration
Select and press <Enter>
Host Name
Example: IntelAMT
TCP/IP
Set the parameters as follows:
Enable
Network interface
Disable
DHCP Mode
Set an IP address (e.g., 192.168.0.15)
Set a subnet mask (e.g., 255.255.255.0)
The default gateway address is optional
The preferred DNS address is optional
The Alternate DNS address is optional
Set the domain name (e.g., amt.intel.com)
Provision Model
Intel AMT 4.0 Mode
Small Business
SOL/IDE-R
Enable
SOL
Enable
IDE-R
Remote FW Update
Enabled
Save and exit MEBx and then boot computer to the Windows operating system.
*
Information on this page provided by
Intel
.
Back to Contents Page