Dell Precision R5400 Remote Access Device: Administrator's User Manual& - Page 53
Monitors, 8.2.2 USB Devices
View all Dell Precision R5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
TERA1x00 PC-over-IP Administrative Interface User Manual Figure 33: Attached Devices Webpage TER0606004 Issue 3 1.8.2.1 Monitors The Monitors section reports the Name, Serial Number, Vendor Identification (VID), Product Identification (PID), Date and Status the monitor attached to each port. The first line provides information for monitor 1, and the second line provides information for monitor 2. This option is available on a Portal and is available on the Host when in a PC-over-IP session. 1.8.2.2 USB Devices The USB Devices section reports the Name, Serial Number, Vendor Identification (VID), Product Identification (PID), Device Class, Sub Class, Protocol, and Status for USB device attached to each port. The first line provides information for the first USB port, followed by the second line for the second port, etc. Table 9 summarizes the USB Devices possible Status descriptors. Table 9: USB Device Status Status Not Connected Standalone Not Initialized Failed Authorized Locally Connected Connected Description No device connected Device detected outside of a PC-over-IP session Device detected in a PC-over-IP session, but host controller has not initialized device Device detected in a PC-over-IP session, but not authorized (see Section 1.6.1) Device detected and authorized, but locally terminated in a PCover-IP session (e.g. local cursor) Device detected and authorized in a PC-over-IP session © 2008 Teradici Corporation Page 53 of 111