Dell Precision T3600 Owner's Manual - Page 19

Installing the System Fan, Removing the Memory, Installing the Memory, Removing the Coin-Cell - memory for

Get Dell Precision T3600 PDF manuals and user guides View all Dell Precision T3600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Installing the System Fan 1. Place the fans in the fan assembly and attach the grommets. 2. Place the fan assembly in the chassis. 3. Install the screws to secure the fan assembly to the chassis. 4. Connect the system fan cables to their connectors on the system board. 5. Route the system fan cables out of the opening in the system fan module in the direction of the system board. 6. Place the air baffle in its slot in the computer and insert the latches. 7. Install the screws that secure the drive bay. 8. Replace the metal plate and install the screw that secures metal plate to the system fan. 9. Route and connect the system board cable to its connector. 10. Install: a) optical drive b) hard drive c) PCI card d) intrusion switch e) cover 11. Follow the procedures in After Working Inside Your Computer. Removing the Memory 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Press down on the memory-securing clips on each side of the memory module, and lift the memory module upwards to remove it from the computer. Figure 2. Installing the Memory 1. Insert the memory module into the memory socket. 2. Press down on the memory module until the securing clips secure the memory in place. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
Installing the System Fan
1.
Place the fans in the fan assembly and attach the grommets.
2.
Place the fan assembly in the chassis.
3.
Install the screws to secure the fan assembly to the chassis.
4.
Connect the system fan cables to their connectors on the system board.
5.
Route the system fan cables out of the opening in the system fan module in the direction of the system board.
6.
Place the air baffle in its slot in the computer and insert the latches.
7.
Install the screws that secure the drive bay.
8.
Replace the metal plate and install the screw that secures metal plate to the system fan.
9.
Route and connect the system board cable to its connector.
10.
Install:
a)
optical drive
b)
hard drive
c)
PCI card
d)
intrusion switch
e)
cover
11.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Memory
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Press down on the memory-securing clips on each side of the memory module, and lift the memory module
upwards to remove it from the computer.
Figure 2.
Installing the Memory
1.
Insert the memory module into the memory socket.
2.
Press down on the memory module until the securing clips secure the memory in place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
19