Dell S2218H Users Guide - Page 29
OSD Warning Messages, Dynamic Contrast, Movie, DDC/CI, Power Save, Monitor Specifications
View all Dell S2218H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
OSD Warning Messages When the Dynamic Contrast feature is enabled (in these preset modes: Game or Movie), the manual brightness adjustment is disabled. Dell S2X18H/HX To allow manual adjustment of brightness, the Energy Smart/Dynamic Contrast will be switched off. Do you want to continue? No Yes When the monitor does not support a particular resolution mode, the following message is displayed: Dell S2X18H/HX The current input timing is not supported by the monitor display. Please change your input timing to 1920x1080, 60Hz or any other monitor listed timing as per the monitor specifications. This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1920 x 1080. You will see the following message before the DDC/CI function is disabled: Dell S2X18H/HX The function of adjusting display setting using PC application will be disabled. Do you wish to disable DDC/CI function? No Yes When the monitor enters the Power Save Mode, the following message appears: Dell S2X18H/HX Entering Power Save Mode. If you press any button other than the power button, the following messages will appear depending on the selected input: Dell S2X18H/HX ? No VGA signal from your device. Press any key on the keyboard or move the mouse to wake it up. If there is no display, press the monitor button again to select the correct input source. Operating Your Monitor | 29