Dell S2419H Monitor Users Guide - Page 39
Troubleshooting, Self-Test
View all Dell S2419H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Troubleshooting WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. Self-Test Your monitor provides a self-test feature that allows you to check if your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps: 1. Turn off both your computer and the monitor. 2. Disconnect all video cables from the monitor. This way, the computer doesn't have to be involved. 3. Turn on the monitor. If the monitor is working correctly, it detects that there is no signal and one of the following message appears. While in self-test mode, the power LED remains white. Dell P2418HZ Dell 24 Monitor ? No HDMI1 Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/monitors Dell Dell 27 Monitor S2419H ? No HDMI1 Cable The display will go into Power Save Mode in 4 minutes. www.dell.com/support/monitors S2719H NOTE: This box also appears during normal system operation, if the video cable is disconnected or damaged. 4. Turn Off your monitor and reconnect the video cable; then turn on your computer and the monitor. If your monitor remains dark after you reconnect the cables, check your video controller and computer. Troubleshooting | 39