Dell S2815dn CACStar Smart Card Reader Installation Guide - Page 3
Dell S2815dn
 |
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Connect the CACStar Ethernet cable to the S2815 Ethernet port. Use the three supplied screws to attach the back assembly to the S2815. Use the M3 x 50mm screw for the lower hole to attach the CACStar using the hole from which the screw was removed earlier. Do not overtighten this screw. Use the 2 M3 x 10mm screws for the upper holes to attach the back assembly to the base CACStar assembly as shown below. CACStar™ Installation v3 Dell S2815dn Page 3
-
1 -
2 -
3 -
4
 |
 |
CAC
Star™
Installation v3
Dell S2815dn
Page 3
Connect the CAC
Star
Ethernet cable to the S2815 Ethernet port. Use the
three supplied screws to attach the back assembly to the S2815.
Use
the M3 x 50mm screw for the lower hole to attach the CAC
Star
using
the hole from which the screw was removed earlier. Do not overtighten
this screw.
Use the 2 M3 x 10mm screws for the upper holes to attach
the back assembly to the base CAC
Star
assembly as shown below.