Dell S2817Q User Guide - Page 20
Setting Up the Monitor, Attaching the Stand - remove stand
View all Dell S2817Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Up the Monitor Attaching the Stand NOTE: The stand riser and stand base are detached when the monitor is shipped from the factory. NOTE: The procedure below is applicable for the default stand. If you purchased any other stand, see the documentation shipped with the stand to set it up. CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the display panel. Connect the stand riser to stand base. 1 Attach the stand riser to the stand base. 2 Tighten the thumbscrew below the stand base. To attach the monitor stand: 1 Remove the monitor protective cover and place the moitor with its front facing downward on it. 2 Insert the two tabs on the upper part of the stand to the groove on the back of the monitor. 3 Press the stand down till it snaps into its place. 20 | Setting Up the Monitor