Dell S510n Dell S510/ SNMP Protocol Document - Page 8

b) If there is FAN alert happen, the tables is shown below. pdmAlertGroupType =" Fan" pdmAlertGrouplD = "Fan Error" pdmAlertSeverity = Critical (3) The rest Object will respond default. c) If there is Lamp fail alert happen, the tables is shown below. pdmAlertGroupType = "Lamp" pdmAlertGrouplD= Lamp Fail pdmAlertSeverity = Critical (3) The rest Object will respond default. d) If there is Lamp hours running out alert happen, the tables is shown below. pdmAlertGroupType = "Lamp" pdmAlertGroupID= Lamp hours running out pdmAlertSeverity = warning (4) The rest Object will respond default. e) If there is Projector Over-heating alert, the tables is shown below. pdmAlertGroupType = "ThermalSensor" pdmAtertGroupID= "Projector Overheating" pdmAtertSeverity = warning (4) The rest Object will respond default. Note 2 1. Other 2. Unknown 3. VGA 4. DVI-D 5. DVI-I 6. HDMI 7. Component Video BNC-5 8. Component Video BNC-3 9. DisplayPort 10. S-Video 11. RJ45 12. Wireless 13. RCA Plug Video-3 14. RCA Plug Audio 15. Mini jack 2 dot 5mm Audio 16. Mini jack 3 dot 5mm Audio 17. Coax Audio 18. Fibre Audio 19. Memory Card 20. USB Memory 21. USB Display 22. InteL0 WiDi 23 Internal Memory Information in this document is subject to change without notice. © 2015 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. May 2015 Rev. A01