Dell S5232F-ON EMC PowerSwitch S5200F-ON Series Installation Guide February 20 - Page 45
PSU LEDs, The S5212F-ON DC PSUs
![]() |
View all Dell S5232F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
The S5296F-ON PSUs: 1. PSUs The S5212F-ON AC PSUs: 1. AC PSUs The S5212F-ON DC PSUs: 1. DC PSUs The PSUs have an integrated fan, which you cannot replace individually; if the fan integrated in a PSU fails, you must replace the entire PSU. You can replace the fan trays individually. For fan tray replacement procedures, see Fans. WARNING: Prevent exposure and contact with hazardous voltages. Do not attempt to operate this switch with the safety cover removed. CAUTION: Remove the power cable from the PSU before removing the PSU. Also, do not connect the power cable before you insert the PSU in the switch. NOTE: To comply with the GR-1089 Lightning Criteria for Equipment Interfacing with AC or DC Power Ports, use an external surge protection device (SPD) at the AC or DC input of the router. PSU LEDs ● Solid green-Input is OK. ● Flashing yellow-There is a fault with the PSU. ● Flashing green blink at 1Hz-Switch is in a standby/CR state. ● Off-PSU is off. Power supplies 45
![](/manual_guide/products/dell-s5212fon-emc-powerswitch-s5200fon-series-installation-guide-2022-7069ac6/45.png)