Dell S5296F-ON Open Networking Hardware Diagnostic Guide August 2018 - Page 42

write Output, ipmitool, CLI options

Get Dell S5296F-ON PDF manuals and user guides View all Dell S5296F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff write Output /opt/dellemc/diag/bin# ./i2ctool --write --bus=/dev/i2c-2 --addr=0x48 --reg=0x14 --val=1 ipmitool The ipmitool accesses the baseboard management controller (BMC) from the processor. CLI options root@dellemc-diag-os:~# ipmitool -V ipmitool version 1.8.18 root@dellemc-diag-os:~# ipmitool No command provided! Commands: raw Send a RAW IPMI request and print response i2c Send an I2C Master Write-Read command and print response spd Print SPD info from remote I2C device lan Configure LAN Channels chassis Get chassis status and set power state power Shortcut to chassis power commands event Send pre-defined events to MC mc Management Controller status and global enables sdr Print Sensor Data Repository entries and readings sensor Print detailed sensor information fru Print built-in FRU and scan SDR for FRU locators gendev Read/Write Device associated with Generic Device locators sdr sel Print System Event Log (SEL) pef Configure Platform Event Filtering (PEF) sol Configure and connect IPMIv2.0 Serial-over-LAN tsol Configure and connect with Tyan IPMIv1.5 Serial-over-LAN isol Configure IPMIv1.5 Serial-over-LAN user Configure Management Controller users channel Configure Management Controller channels session Print session information dcmi Data Center Management Interface nm Node Manager Interface sunoem OEM Commands for Sun servers kontronoem OEM Commands for Kontron devices picmg Run a PICMG/ATCA extended cmd fwum Update IPMC using Kontron OEM Firmware Update Manager firewall Configure Firmware Firewall delloem OEM Commands for Dell systems shell Launch interactive IPMI shell exec Run list of commands from file set Set runtime variable for shell and exec hpm Update HPM components using PICMG HPM.1 file ekanalyzer run FRU-Ekeying analyzer using FRU files ime Update Intel Manageability Engine Firmware vita Run a VITA 46.11 extended cmd lan6 Configure IPv6 LAN Channels root@dellemc-diag-os:~# ipmitool mc info Device ID : 32 42 Dell EMC DAIG-OS tools

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
write Output
/opt/dellemc/diag/bin# ./i2ctool --write --bus=/dev/i2c-2 --addr=0x48 --reg=0x14 --val=1
ipmitool
The
ipmitool
accesses the baseboard management controller (BMC) from the processor.
CLI options
root@dellemc-diag-os:~# ipmitool -V
ipmitool version 1.8.18
root@dellemc-diag-os:~# ipmitool
No command provided!
Commands:
raw
Send a RAW IPMI request and print response
i2c
Send an I2C Master Write-Read command and print response
spd
Print SPD info from remote I2C device
lan
Configure LAN Channels
chassis
Get chassis status and set power state
power
Shortcut to chassis power commands
event
Send pre-defined events to MC
mc
Management Controller status and global enables
sdr
Print Sensor Data Repository entries and readings
sensor
Print detailed sensor information
fru
Print built-in FRU and scan SDR for FRU locators
gendev
Read/Write Device associated with Generic Device locators sdr
sel
Print System Event Log (SEL)
pef
Configure Platform Event Filtering (PEF)
sol
Configure and connect IPMIv2.0 Serial-over-LAN
tsol
Configure and connect with Tyan IPMIv1.5 Serial-over-LAN
isol
Configure IPMIv1.5 Serial-over-LAN
user
Configure Management Controller users
channel
Configure Management Controller channels
session
Print session information
dcmi
Data Center Management Interface
nm
Node Manager Interface
sunoem
OEM Commands for Sun servers
kontronoem
OEM Commands for Kontron devices
picmg
Run a PICMG/ATCA extended cmd
fwum
Update IPMC using Kontron OEM Firmware Update Manager
firewall
Configure Firmware Firewall
delloem
OEM Commands for Dell systems
shell
Launch interactive IPMI shell
exec
Run list of commands from file
set
Set runtime variable for shell and exec
hpm
Update HPM components using PICMG HPM.1 file
ekanalyzer
run FRU-Ekeying analyzer using FRU files
ime
Update Intel Manageability Engine Firmware
vita
Run a VITA 46.11 extended cmd
lan6
Configure IPv6 LAN Channels
root@dellemc-diag-os:~# ipmitool mc info
Device ID
: 32
42
Dell EMC DAIG-OS tools