Dell ST2010B User's Guide - Page 18
Menu Timer, Menu Lock, DDC/CI, LCD Conditioning, Factory Reset, Personalize
View all Dell ST2010B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Menu Timer Menu Lock DDC/CI OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button. Use the and button to adjust the slider in 5 second increments, from 5 to 60 seconds. Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except the menu button. NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock selected. Select "Unlock" to unlock and allow user access to all applicable settings. DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your monitor. You can disable this feature by selecting "Disable". Enable this feature for best user experience and optimum performance of your monitor. LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to run. You can enable this feature by selecting "Enable". Factory Reset Back Personalize Reset all OSD settings to the factory preset values. Press to go back to the main menu. There are two shortcut keys on the front panel. Select one control menu for each shortcut key to allow direct access.