Dell Studio Desktop Service Manual - Page 6
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card - drivers
View all Dell Studio Desktop manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Replace the card retention bracket ensuring that: l The guide clamp is aligned with the guide notch. l The tops of all cards and filler brackets are flush with the alignment bar. l The notch in the top of the card or filler bracket fits around the alignment guide. 1 alignment guide 3 alignment bar 5 guide clamps (2) 2 filler bracket 4 card retention bracket 6 guide notchs (2) Configuring Your Computer After Removing or Installing a PCI/PCI Express Card NOTE: For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card. Installed Sound Card 1. Enter system setup (see System Setup). 2. Go to Integrated Peripherals and select Onboard Audio Controller, and then change the setting to Disabled. 3. Connect the external audio devices to the sound card's connectors. Removed 1. Enter system setup (see System Setup). 2. Go to Integrated Peripherals and select Onboard Audio Controller change the setting to Enabled. 3. Connect the external audio devices to the computer's back panel connector Network Card 1. Enter system setup (see System Setup). 2. Go to Integrated Peripherals and select Onboard LAN Controller, and then change the setting to Disabled. 3. Connect the network cable to the network card's connector. 1. Enter system setup (see System Setup). 2. Go to Integrated Peripherals and select Onboard LAN Controller change the setting to Enabled. 3. Connect the network cable to the integrated network connector. Back to Contents Page