Dell U8510 User Guide - Page 19

Configuring the wireless printer adapter, Launch, Settings, Print Server Settings, Wireless, Submit

Get Dell U8510 - Wireless Printer Adapter 3300 Print Server PDF manuals and user guides View all Dell U8510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

3. Configuring the wireless printer adapter 1. If you used the Set IP Address Utility to locate the IP Address and the Utility is still open, click Launch to access the embedded web page of the wireless printer adapter. Otherwise, open a web browser and enter the wireless printer adapter IP address as the URL to access the embedded web page of the wireless printer adapter. 2. Click the Settings link on the left side of the Web page. 3. Under Print Server Settings, click the Wireless link. 4. Change the listed network settings to match the original wireless network that you recorded in step 1, including: Network Name (SSID) BSS type (Infrastructure or Ad-Hoc) Channel Number Encryption Mode (WEP, WPA, None) Authentication type (Open, Shared) NOTE: The SSID must be entered exactly as it is used on your network. SSIDs are case-sensitive, and if the SSID is entered incorrectly, the wireless printer adapter will not be able to communicate on the network and the configuration process must be repeated. 5. Click Submit. 6. 7.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
Configuring the wireless printer adapter
If you used the Set IP Address Utility to locate the IP Address and the Utility is still open, click
Launch
to access the embedded web page of the wireless printer adapter.
1.
Otherwise, open a web browser and enter the wireless printer adapter IP address as the URL to access
the embedded web page of the wireless printer adapter.
Click the
Settings
link on the left side of the Web page.
2.
Under
Print Server Settings
, click the
Wireless
link.
3.
Change the listed network settings to match the original wireless network that you recorded in
step 1
,
including:
Network Name (SSID)
BSS type (Infrastructure or Ad-Hoc)
Channel Number
Encryption Mode (WEP, WPA, None)
Authentication type (Open, Shared)
4.
NOTE:
The SSID must be entered exactly as it is used on your network. SSIDs are case-sensitive, and
if the SSID is entered incorrectly, the wireless printer adapter will not be able to communicate on the
network and the configuration process must be repeated.
Click
Submit
.
5.
6.