Dell VNX8000 VNX Command Line Interface Reference for Block 5.33 - Page 166

VNX CLI for Block EXAMPLE This command shows you the setting of the automated SPCollect functionality for the specified system. The Enabled setting, indicating that the SPCollect process is turned on, appears in the output above. naviseccli -address ss\1_spa spcollect -info OUTPUT AutoExecution: Enabled spcollect -set Sets the automated SPCollect service on or off. PREREQUISITES You must have a user account on the system on which you want to execute the command. DESCRIPTION The naviseccli spcollect command with the -set function lets you set the automated SPCollect process on or off. The automated SPCollect service is part of the Peerwatch service included with VNX OE for Block version 02.19.xxx.5.yyy or higher. Note: Use spcollect -info to verify whether the service is enabled or disabled. SYNTAX spcollect -set -auto on|off [-o] OPTIONS -auto on|off Sets the automated SPCollect process on or off. If you indicate on, it turns the automation service on; if you indicate off, it turns the automation service off. -o Executes the command without prompting for confirmation. EXAMPLE This command turns the automated SPCollect process on. naviseccli -address ss1_spa spcollect -set -auto on OUTPUT None if the command succeeds; status or error information if it fails. spcollect Selects and places a collection of system log files into a single .zip file. PREREQUISITES For naviseccli, you must have a user account on the system on which you want to execute the command. 166 EMC® VNX® Series Command Line Interface Reference for Block