Dell VOSTRO ALL IN ONE Owner's Manual - Page 165
Replacing the DIMM A Memory Module, Align the notch in the module edge connector with the tab in
![]() |
UPC - 041500250366
View all Dell VOSTRO ALL IN ONE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
1 2 1 memory module (DIMM A) 2 memory-module securing clips (2) Replacing the DIMM A Memory Module NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). 1 Align the notch in the module edge connector with the tab in the connector slot. 2 Slide the memory module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it. NOTE: If the memory module is not installed properly, the computer may not boot. No error message indicates this failure. Adding and Replacing Parts 165
![](/manual_guide/products/dell-vostro-1700-owners-manual-513bc0f/165.png)
Adding and Replacing Parts
165
Replacing the DIMM A Memory Module
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on the back of the computer).
1
Align the notch in the module edge connector with the tab in the
connector slot.
2
Slide the memory module firmly into the slot at a 45-degree angle, and
rotate the module down until it clicks into place. If you do not feel the
click, remove the module and reinstall it.
NOTE:
If the memory module is not installed properly, the computer may not boot.
No error message indicates this failure.
1
memory module (DIMM A)
2
memory-module securing clips (2)
1
2