Dell Vostro 14 3468 Vostro 14-3468 Owners Manual - Page 71
Table 14. Power Management, If Custom Charge is selected
View all Dell Vostro 14 3468 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Option C States Control Intel TurboBoost Hyper-Thread Control Description Default Setting: The option is enabled. Allows you to enable or disable the additional processor sleep states. • C states Default Setting: The option is enabled. Allows you to enable or disable the Intel TurboBoost mode of the processor. • Enable Intel TurboBoost Default Setting: The option is enabled. Allows you to enable or disable the HyperThreading in the processor. • Disabled • Enabled Default Setting: The option is enabled. Table 14. Power Management Option AC Behavior Description Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default Setting: Wake on AC is not selected. Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled (default) • Every Day • Weekdays • Select Days USB Wake Support Allows you to enable USB devices to wake the system from Standby. NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup will remove power from all of the USB ports to conserve battery power. • Enable USB Wake Support Default Setting: The option is disabled. Wake on LAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. • Disabled: This option is enabled by default • LAN Only Primary Battery Charge Configuration Allows you to select the charging mode for the battery. The options are: • Adaptive • Standard - Fully charges your battery at a standard rate. • Primarily AC use • Custom If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop. NOTE: All charging mode may not be available for all the batteries. To enable this option, disable the Advanced Battery Charge Configuration option. System setup 71