Dell Vostro 15 Owners Manual - Page 32
Installing the Heatsink Assembly, Removing the Power Connector
View all Dell Vostro 15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Installing the Heatsink Assembly 1. Insert the heatsink and tighten the screws to secure it to the system board. 2. Connect the system fan's cable to the system board. 3. Install: a. system board b. palmrest assembly c. keyboard d. memory module e. hard drive f. WLAN g. access panel h. optical disk-drive i. battery 4. Follow the procedures in After Working Inside Your computer. Removing the Power Connector 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. palmrest assembly 3. Perform the following steps as shown in the illustration: a. Disconnect the power connector from the system board [1]. 32
Installing the Heatsink Assembly
1.
Insert the heatsink and tighten the screws to secure it to the system board.
2.
Connect the system fan’s cable to the system board.
3.
Install:
a.
system board
b.
palmrest assembly
c.
keyboard
d.
memory module
e.
hard drive
f.
WLAN
g.
access panel
h.
optical disk-drive
i.
battery
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the Power Connector
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
optical disk-drive
c.
access panel
d.
hard drive
e.
memory module
f.
keyboard
g.
palmrest assembly
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the power connector from the system board [1].
32