Dell Vostro 3583 Service Manual - Page 54

Power-button board, Removing the power button board

Get Dell Vostro 3583 PDF manuals and user guides View all Dell Vostro 3583 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Next steps 1. Replace the WLAN 2. Connect the battery cable to the connector on the system board. 3. Replace the base cover 4. Replace the SD memory card 5. Follow the procedure in after working inside your computer Power-button board Removing the power button board Prerequisites 1. Follow the procedure in before working inside your computer 2. Remove the SD memory card 3. Remove the base cover 4. Disconnect the battery cable from the connector on the system board. 5. Remove the WLAN 6. Remove the system fan 7. Remove the display assembly Steps 1. Open the latch and disconnect the power button board cable from the system [1]. 2. Peel the conductive tape off the power button board [2]. 3. Remove the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [3]. 4. Lift the power button board, along with the cable off the palmrest and keyboard assembly [4]. 54 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
Next steps
1.
Replace the
WLAN
2.
Connect the battery cable to the connector on the system board.
3.
Replace the
base cover
4.
Replace the
SD memory card
5.
Follow the procedure in
after working inside your computer
Power-button board
Removing the power button board
Prerequisites
1.
Follow the procedure in
before working inside your computer
2.
Remove the
SD memory card
3.
Remove the
base cover
4.
Disconnect the battery cable from the connector on the system board.
5.
Remove the
WLAN
6.
Remove the
system fan
7.
Remove the
display assembly
Steps
1.
Open the latch and disconnect the power button board cable from the system [1].
2.
Peel the conductive tape off the power button board [2].
3.
Remove the single (M2x2) screw that secures the power button board to the palmrest and keyboard assembly [3].
4.
Lift the power button board, along with the cable off the palmrest and keyboard assembly [4].
54
Removing and installing components