Dell Vostro 3584 Setup and specifications guide - Page 28

Power management Option AC Behavior Description Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default setting: Wake on AC is not selected. Enable Intel Speed Shift Technology • Enable Intel Speed Shift Technology Default setting: Enabled Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled • Every Day • Weekdays • Select Days Default setting: Disabled USB Wake Support Allows you to enable USB devices to wake the system from Standby. NOTE: This feature is only functional when the AC power adapter is connected. If the AC power adapter is removed during Standby, the system setup removes power from all the USB ports to conserve battery power. • Enable USB Wake Support Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. • Disabled • WLAN Default setting: Disabled Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you enable this option, your system runs only in battery even if the AC is attached. • Enable peak shift-is disabled • Set battery threshold (15% to 100%) - 15 % (enabled by default) Advanced Battery Charge Configuration This option enables you to maximize the battery health. By enabling this option, your system uses the standard charging algorithm and other techniques, during the non work hours to improve the battery health. Enable Advanced Battery Charge Mode- is disabled Primary Battery Charge Configuration Allows you to select the charging mode for the battery. The options are: • Adaptive-enabled by default • Standard-Fully charges your battery at a standard rate. • Primarily AC use • Custom 28 System setup