Dell Vostro 5390 Setup and specifications guide - Page 30
the BIOS POST Power-On Self-Test load time., Wireless Device Enable
![]() |
View all Dell Vostro 5390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Power Management Enable Advanced Battery Charge Configuration Block Sleep Enable USB Wake Support Enable Intel Speed Shift Technology Lid Switch Enables Advanced Battery Charge Configuration from the beginning of the day to a specified work period. Advanced Battery Charged maximizes battery health while still supporting heavy use during the work day. Default: OFF. Blocks the computer from entering Sleep (S3) mode in the operating system. Default: OFF. NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will be disabled automatically, and the operating system power option will be blank if it was set to Sleep. Enables the USB devices to wake the computer from Standby mode. Default: OFF. Enables or disables Intel Speed Shift Technology support which enables the operating system to select the appropriate processor performance automatically. Default: ON. Enables the computer to power up from the off state whenever the lid is opened. Default: ON. Table 36. System setup options-Wireless menu Wireless Wireless Switch Determines which wireless devices can be controlled by the Wireless Switch. For Windows 8 systems, this is controlled by an operating system drive directly. As a result, the setting does not affect the Wireless Switch behavior. NOTE: When both WLAN and WiGig are present, enable/disable controls are tied together. Thus, they cannot be enabled or disabled independently. WLAN Default: ON. Bluetooth Default: ON. Wireless Device Enable WLAN Enable or disable internal WLAN/Bluetooth devices. Default: ON. Bluetooth Default: ON. Table 37. System setup options-POST Behavior menu POST Behavior Numlock Enable Enables or disables Numlock when the computer boots. Default: ON. Enable Adapter Warnings Enables the computer to display adapter warning messages during boot. Default: ON. Extend BIOS POST Time Configures the BIOS POST (Power-On Self-Test) load time. Default: 0 seconds. Fastboot Configures the speed of the UEFI boot process. 30 System setup
![](/manual_guide/products/dell-vostro-5390-setup-specifications-guide-5948401/30.png)