Dell W-7005 AOS 6.4.x User Guide - Page 911

4. Under NTP Identification Keys, enter an identification key (a number between 1 and 65535) in the Identification Key field. Then add a secret string in the MD5 Secret field. The MD5 ID key must be an ASCII string up to 31 characters. 5. Click Add. 6. The identification key along with its corresponding MD5 secret string is displayed in the Identification Keys section. 7. Under NTP Trusted Keys, enter a string in the Trusted Key field. This is a subset of keys which are trusted. The trusted key value must be numeric values between 1 to 65535. 8. Click Apply. In the CLI This example enables NTP authentication, add authentication secret keys into the database, and specifies a subset of keys which are trusted. It also enables the iburst option. (host) (config) #ntp authenticate (host) (config) #ntp authentication-key md5 (host) (config) #ntp trusted-key (host) (config) #ntp server (host) (config) #ntp server Timestamps in CLI Output The timestamp feature can include a timestamp in the output of each show command issued in the commandline interface, indicating the date and time the command was issued. Note that the output of show clock and show log do not include timestamps, even when this feature is enabled. To enable this feature, access the command-line interface in config mode and issue the command clock append. (host) (config) #clock append ClearPass Profiling with IF-MAP This feature is used in conjunction with ClearPass Policy Manager. It sends HTTP User Agent Strings and mDNS broadcast information to ClearPass so that it can make more accurate decisions about what types of devices are connecting to the network. In the WebUI To enable and configure this feature: 1. Navigate to Configuration >All Profiles>Other Profiles. 2. Click the CPPM IF-MAP profile. 3. Configure this profile according to the following parameters: 911 | Management Access Dell Networking W-Series ArubaOS 6.4.x | User Guide