Dell W-7010 AOS 6.4.x User Guide - Page 787

1. From the Monitoring > Spectrum Analysis > Spectrum Dashboards window, click the down arrow at the end of the title bar for the graph you want to configure. 2. Select Options. The Options window appears to the right of the graph. Figure 117 Viewing Spectrum Analysis Graph Options 3. From the Options window, configure graph settings described in Spectrum Analysis Graph Configuration Options on page 787. 4. When you are done, click OK at the bottom of the Options window to hide the options window. 5. (Optional) Click Save Spectrum View at the top of the window to save your new settings. Spectrum Analysis Graph Configuration Options The following sections describe the customizable parameters and the default settings for each spectrum analysis graph. Active Devices This graph appears as a pie chart showing the percentages and total numbers of each device type for all active devices seen by the spectrum monitor or hybrid AP radio. This chart is useful for determining which types of devices are sending signals on the specified radio band or channel. The Active Devices graphs for spectrum monitors can be configured to show data for several different device types on a single radio channel or range of channels. Active Devices graphs for hybrid APs can show data for the single monitored channel only. When you hover your mouse over any section of the pie chart, a tooltip displays the percentage and number of active devices classified into that device type. The example in Figure 118 shows that 99% of the active devices a spectrum monitor radio sees in the 2.4 GHz band are Wi-Fi APs. 787 | Spectrum Analysis Dell Networking W-Series ArubaOS 6.4.x | User Guide