Dell W-7010 AOS 6.x MIB Reference Guide - Page 19
Using MIBs, Downloading MIB Files, Retrieving Information from a MIB
![]() |
View all Dell W-7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Chapter 3 Using MIBs This chapter provides information on and examples of using MIBs. "Downloading MIB Files" on page 19 "Reading MIB Files" on page 20 "SNMP File" on page 25 "HP OpenView" on page 26 "MIB Limitations" on page 26 Downloading MIB Files The most recent Dell MIB files are available for registered customers at: dell.com/support Retrieving Information from a MIB To retrieve information from a MIB, the following information is required: SNMP version SNMP community name-public or private The IP Address of the Dell Mobility Controller The OID of the MIB value you want to monitor In addition, MIB files can be placed in the appropriate disk location to assist the user in locating desired OID values for monitoring. If MIB files need to be acquired, contact the support site. It is assumed that the workstation is connected to the Dell controller and that a MIB browser is available. For most applications, the root of the MIB must be included in the OID-the OID begins with a decimal point as shown below. .1.3.6.1.4.1.674.2.2.1.1.2.1 MIB Browsers If using an application that is run through CLI (a cmd window), the command would resemble the following: snmpget -v 2c -c Figure 2 shows an example of submitting a command to obtain information. Figure 2 CLI Interface Figure 3 shows how information may be obtained through a graphical user interface (GUI). The user interface and the available features vary by application. Dell Networking W-Series ArubaOS 6.x MIB | Reference Guide Using MIBs | 19
![](/manual_guide/products/dell-w7005-aos-6x-mib-reference-guide-d363eb5/19.png)