Dell W-Series 277 AP-270-MNT-H2 Mounting Kit Installation Guide - Page 1
Dell W-Series 277 Manual
View all Dell W-Series 277 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
AP-270-MNT-H2 Mounting Kit Installation Guide The AP-270-MNT-H2 mounting kit supports multiple access point (AP) models. All installation images show the 277 AP. Package Content AP-270-MNT-H2 Mounting Bracket x 1 M6x20 Screws x 2 Installation Guide (this document) Installation 1. Use the AP-270-MNT-H2 as the template to mark the four mounting points on the wall. 2. Use a drill to make four holes on the four markings from the previous step. 3. Insert an anchor bolt (not included in the package) into each drilled hole. 4. Place the mounting bracket over the anchor bolts and press the bracket against the wall. 5. Place the washers and nut onto the bolt's threaded end and tighten the nut until the mounting bracket is firmly attached to the wall. Figure 1 Attaching the Mounting Bracket to a Wall 0511782-03 | April 2015 1