Dell W-Series 304 320 Series Access Points Installation Guide - Page 5
Verifying Post-Installation Connectivity, Configuring the 300 Series
View all Dell W-Series 304 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Figure 5 Mounting the Access Point Connecting Required Cables Install cables in accordance with all applicable local and national regulations and practices. Verifying Post-Installation Connectivity The integrated LEDs on the access point can be used to verify that the access point is receiving power and initializing successfully (see Figure 1). Refer to the Quick Start Guide for further details on verifying post-installation network connectivity. Configuring the 300 Series Note: The instructions in this section are applicable to the W-AP304 and W-AP305 only. Access Point Provisioning/Reprovisioning Provisioning parameters are unique to each access point. These local access point parameters are initially configured on the controller which are then pushed out to the access point and stored on the access point itself. Dell recommends that provisioning settings be configured via the AOS Web UI only. Refer to the AOS User Guide for complete details. Access Point Configuration Configuration parameters are network or controller specific and are configured and stored on the controller. Network configuration settings are pushed out to the access point but remain stored on the controller. Configuration settings can be configured via the AOS Web UI or AOS CLI. Refer to the respective guides for complete details. Contacting Dell Website Support Main Website Contact Information Support Website Documentation Website dell.com dell.com/contactdell dell.com /support dell.com /support/manuals Copyright © Copyright 2016 Hewlett Packard Enterprise Development LP. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. All other trademarks are the property of their respective owners. Open Source Code This product includes code licensed under the GNU General Public License, the GNU Lesser General Public License, and/or certain other open source licenses. A complete machine-readable copy of the source code corresponding to such code is available upon request. This offer is valid to anyone in receipt of this information and shall expire three years following the date of the final distribution of this product version by Hewlett-Packard Enterprise Company. To obtain such source code, send a check or money order in the amount of US $10.00 to: Hewlett-Packard Enterprise Company Attn: General Counsel 3000 Hanover Street Palo Alto, CA 94304 USA 5 Dell Networking 300 Series Access Points | Installation Guide