Dell W5001 Owner's Manual - Page 36

FILE LOCATION: D:\manual\Dell\W4201OM\approval-B\ch5e.fm |support.dell.com General Problems Problem Possible Solution Poor picture quality while watching 1 Check the aspect ratio settings in the TV Menu. Press the Menu TV and using a device such as a DVD button on the remote control and select Size. For more player or a VCR information on using the TV Menu, see "Using the TV Menu" on page 27. .dell.com 2 Reconnect the device using the same type of connector. For example, if you are using the composite connector on the bottom, try connecting the device to the composite connector on the side of the TV. See "About Your TV" on page 5 for the location of the w w w connectors. After you connect the device, change the input source in the TV Menu. See "Input Select" on page 28 for more information. 3 Connect the device using a different connector. For example, if you are experiencing the problem using a composite connector, try using the component connector. NOTE: To connect to a different connector, you need the appropriate cables for that connector. See your device documentation for a list of supported connections. After you connect the device, change the input source in the TV Menu. See "Input Select" on page 28 for more information. 4 Reset the original factory defaults. Press Menu on the remote control, select Setup, and then select Factory Reset. 5 Adjust the color temperature. Press Menu on the remote control, select Picture, and then select Color Temperature. NOTE: Some set top boxes offer aspect ratio. See your device documentation for more information. Poor picture quality when using a device connected to the ANT/Cable (coaxial) connector 1 Ensure TV is selected as the input source in the Input Source menu. See "Input Select" on page 28 for more information. 2 Press Menu on the remote control, select Setup, and then select Channel Setup. This resets the channels on your TV. 3 Check the aspect ratio settings in the TV Menu. Press the Menu button on the remote control and select Size. For more information on using the TV Menu, see "Using the TV Menu" on page 27. 4 Reset the original factory defaults. Press Menu on the remote control, select Setup, and then select Factory Reset. 5 Adjust the color temperature. Press Menu on the remote control, select Picture, and then select Color Temperature. 6 The problem may be with your device, contact your service provider. DELL CONFIDENTIAL - PRELIMINARY 12/28/05 - FOR PROOF ONLY 36 Troubleshooting Problems With Your TV