Dell Wyse 5070 Wyse ThinOS Version 8.5 and ThinOS Lite 2.5 Operating System Re - Page 82

Parameters [VUSB_VIDEO={yes, no}] [VUSB_PRINTER={yes, no}] [FullScreen={no, yes}] [Resolution={default, vga_resolution}] [DisableResetVM={no, yes}] [WyseVDAServerPort=serverPort] [FontSmoothing={yes, no}] [AutoConnect={yes, no}] [MultiMonitor={yes, no}] [EnableImprivataVC={yes,no}] [Locale=LocaleID] [SessionLogoffTimeout=seconds] [GroupSession={yes,no}] * [OnDesktop={default, all, none, desktops, applications, ondesktop_list} 82 ThinOS 8.5_012 and ThinOS Lite 2.5_012 Description 1 The port range is a list of start port and end port separated by a semicolon (;) or a comma (,). 2 Both ports must be between 1 and 65535. 3 The end port must be greater than start port. For example, WyseVDA_PortRange=3000,3010, the start port is 3000, the end port is 3010. UnmapClipboard-Default is no. Yes/no option to disable clipboard redirection for all sessions. For ICA and RDP, specifies if redirecting the clipboard. This setting in wnos.ini are saved into nvram, if EnableLocal parameter is set to yes in wnos.ini. DefaultColor-Specifies the default color depth to use for the session 0=256, 1=High color, 2=True Color. VUSB_DISKS, VUSB_AUDIO, VUSB_VIDEO, and VUSB_PRINTER-Default no. Specifies if these USB devices are redirected to the server using TCX Virtual USB or ICA or RDP USB redirection. By default, these devices are set as local devices. NOTE: For example, if you want to use USB disks as a network disk, you can set SessionConfig=all mapdisks=yes VUSB_DISKS=no. If you want to use USB disks as server side device, you can set SessionConfig=all mapdisks=no VUSB_DISKS=yes. The devices are displayed in device manager of the session. FullScreen-Default is no. Specifies the default screen mode. When you use FullScreen in a Dual Screen mode, the session is displayed in span mode Resolution-Default is default. Specifies the session resolution. For example, 640 x 480 and other supported resolutions. Default sets the resolution to the native resolution of the monitor. Setting the resolution to a value smaller than the native resolution of the monitor, allows the session in Windowed mode. The resolution value cannot be higher than the native resolution. DisableResetVM-Default is no. Set DisableResetVM=yes to disable reset VM function. As default, this function is controlled by the server side is enabled including VMware View or Citrix PNA. WyseVDAServerPort-Sets Wyse VDA Server Port for a ThinOS VDA client. The default port is 3471. The port range must be from 1029 to 40000. For example, WyseVDAServerPort=3000, sets VDA server port to 3000 and the client connects to the VDA server using this port. FontSmoothing-Default is yes. Set no to disable font smoothing. AutoConnect-Default is yes. Set no to disable Auto Connect function. MultiMonitor-Default is yes. Sets a multiple monitor layout. Set MultiMonitor=no to disable multiple monitor layout functions. The session has the same desktop width and height with local virtual desktop size, spanning across multiple monitors, if necessary. EnableImprivataVC-Default is yes. If set to no, the Imprivata Virtual Channel is disabled. The user can use vusb redirect instead of Imprivata Virtual Channel mode to use the Rfideas or finger print device in session as server side remote device.