Dell XPS 15 9530 Owners Manual - Page 29

Replacing the Coin-Cell Battery, Procedure, Postrequisites

Page 29 highlights

Replacing the Coin-Cell Battery WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before Working Inside Your Computer" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. WARNING: The battery may explode if installed incorrectly. Replace the battery only with the same or equivalent type. Discard used batteries according to the manufacturer's instructions. Procedure 1 Adhere the coin-cell battery into its position on the palm-rest assembly. 2 Connect the coin-cell battery cable to the I/O board. Postrequisites 1 Replace the wireless card. See "Replacing the Wireless Card" on page 27. 2 Replace the battery. See "Replacing the Battery" on page 17. 3 Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on page 12. Replacing the Coin-Cell Battery | 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

Replacing the Coin-Cell Battery
|
29
Replacing the Coin-Cell Battery
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
WARNING:
The battery may explode if installed incorrectly. Replace the battery
only with the same or equivalent type. Discard used batteries according to the
manufacturer’s instructions.
Procedure
1
Adhere the coin-cell battery into its position on the palm-rest assembly.
2
Connect the coin-cell battery cable to the I/O board.
Postrequisites
1
Replace the wireless card. See "Replacing the Wireless Card" on page 27.
2
Replace the battery. See "Replacing the Battery" on page 17.
3
Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.