Dell XPS 400 9150 XPS 400/Dimension 9150 Owners Manual - Page 96
Floppy Drive, Removing a Floppy Drive
View all Dell XPS 400 9150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
www.dell.com | support.dell.com 8 Check all connectors to be certain that they are properly cabled and firmly seated. 9 Replace the computer cover (page 107). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 10 Connect your computer and devices to electrical outlets, and turn them on. See the documentation that came with the drive for instructions on installing any software required for drive operation. Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. NOTE: If you are adding a floppy drive, see ""Installing a Floppy Drive" on page 98." Removing a Floppy Drive 1 Follow the procedures in "Before You Begin" on page 63. 2 Remove the computer cover (see page 68). 3 Disconnect the power and floppy drive cables from the back of the floppy drive. 4 Disconnect the other end of the floppy drive cable from the system board. 96 Removing and Installing Parts