Dell XPS 720 Owner's Manual - Page 129
Installing the Processor Airflow Shroud Assembly, Processor, Removing the Processor
View all Dell XPS 720 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Installing the Processor Airflow Shroud Assembly 1 Follow the procedures in "Before You Begin" on page 85. 2 Remove the computer cover (see "Removing the Computer Cover" on page 86). 3 Align the hinge slots on the processor airflow shroud with the hinge guides on the system board. 4 Gently rotate the processor airflow shroud towards the fan, and then tighten the two captive screws. 5 Connect the fan cable to the FAN1_CPU connector on the system board (see "System Board Components" on page 89). 6 Close the computer cover (see "Replacing the Computer Cover" on page 159). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer. 7 Connect your computer and devices to electrical outlets, and turn them on. Processor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Do not perform the following steps unless you are familiar with hardware removal and replacement. Performing these steps incorrectly could damage your system board. Removing the Processor 1 Follow the procedures in "Before You Begin" on page 85. 2 Remove the computer cover (see "Removing the Computer Cover" on page 86). 3 Disconnect the power cables from the POWER1 and POWER2 connectors (see "System Board Components" on page 89) on the system board. 4 Remove the airflow shroud (see "Removing the Processor Airflow Shroud Assembly" on page 128). 5 Push down and out on the socket release lever. Removing and Installing Parts 129