Dell XPS 730 Dell™ Technology Guide - Page 283
to run. See Using the Dell Diagnostics Main Menu on CD/DVD/CD-RW, Boot from CD-ROM
View all Dell XPS 730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again. NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities media. 4 Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive. 5 When the Dell Diagnostics Main Menu appears, select the test you want to run. See "Using the Dell Diagnostics Main Menu" on page 284. 6 Continue with "Using the Dell Diagnostics Main Menu" on page 284. Starting the Dell Diagnostics From the Drivers and Utilities Media 1 Insert the Drivers and Utilities media. 2 Shut down and restart the computer. When the DELL logo appears, press immediately. NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again. NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 3 When the boot device list appears, highlight CD/DVD/CD-RW and press . 4 Select the Boot from CD-ROM option from the menu that appears and press . 5 Type 1 to start the CD menu and press to proceed. 6 Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer. 7 When the Dell Diagnostics Main Menu appears, select the test you want to run. 8 Continue with "Using the Dell Diagnostics Main Menu" on page 284. Troubleshooting 283