Dell Z9264F-ON EMC Networking Virtualization Overlay with BGP EVPN - Page 63
Simulated external network interface configuration, Upstream interfaces, Static routes to VNIs
![]() |
View all Dell Z9264F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
A.3 A.4 A.5 Simulated external network interface configuration 1. Create a loopback interface. 2. Specify an IP address to represent a connection to the external network. Loopback interface configuration Gateway/firewall switch interface loopback0 description testlo0 no shutdown ip address 1.1.1.1/32 Upstream interfaces These interfaces are connected to the border leafs upstream. 1. Create a port channel and assign it to VLAN 1. 2. Assign the interfaces connected to the border leafs to the port channel. Upstream interfaces Gateway/firewall switch interface port-channel 100 switchport access vlan 1 interface range ethernet 1/1/11-1/1/12 channel-group 100 mode active Static routes to VNIs The routes configured here provide a path for external traffic to route to VNIs 1614 and 1615. 1. Configure static routes to VNI 1614, 172.16.14.0, via the VNI 1616 IP addresses configured on Leaf3a and Leaf3b upstream. 2. Configure a static route to VNI 1615, 172.16.15.0, via the VNI 1616 IP addresses configured on Leaf3a and Leaf3b upstream. 3. When the configuration is complete, exit configuration mode and save the configuration with the end and write memory commands. Static routes to VNIs Gateway/firewall switch ip route 172.16.14.0/24 172.16.16.245 ip route 172.16.14.0/24 172.16.16.246 ip route 172.16.15.0/24 172.16.16.245 ip route 172.16.15.0/24 172.16.16.246 end write memory 63 Dell EMC Networking Virtualization Overlay with BGP EVPN
![](/manual_guide/products/dell-powerswitch-s3048on-emc-networking-virtualization-overlay-bgp-evpn-aa0c45e/63.png)