Dell blcwxfg_1 User's Guide - Page 193
Installing the Fan, Pen and Whip Antenna Assembly, Removing the Pen and Whip Antenna Assembly
![]() |
View all Dell blcwxfg_1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
1 M2 x 3-mm screws (4) 3 fan cable connector 2 fan Installing the Fan 1 Seat the fan into the system board, and tighten the four M2 x 3-mm screw using a #0 Phillips screwdriver. 2 Connect the fan cable to the system board. 3 Install the system board (see "Installing the System Board" on page 191). 4 Install the palm rest (see "Installing the Palm Rest" on page 189). 5 Install the keyboard (see "Installing the Keyboard" on page 177). 6 Install the display assembly (see "Installing the Display Assembly" on page 182). 7 Install the hinge cover (see "Installing the Hinge Cover" on page 175). 8 Install any Mini-Cards (see "Installing a Mini-Card" on page 173). Pen and Whip Antenna Assembly CAUTION: Before performing the following procedures, follow the safety instructions in your Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of the Tablet-PC. NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the Tablet-PC. Removing the Pen and Whip Antenna Assembly 1 Follow the procedures in "Before You Begin" on page 155. 2 Remove the hinge cover (see "Removing the Hinge Cover" on page 174). 3 Remove the display assembly (see "Removing the Display Assembly" on page 179). 4 Remove the keyboard (see "Removing the Keyboard" on page 176). Adding and Replacing Parts 193
![](/manual_guide/products/dell-latitude-xt-users-guide-35d232d/193.png)