Denon 1708 Owners Manual - English - Page 61
Symptom, Cause, Countermeasure, Audio, Video - avr hdmi audio
UPC - 081757507813
View all Denon 1708 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
GAudioH Symptom Cause Countermeasure No sound is produced from center speaker. • You are playing a monaural • The mode is set to something source (TV, AM radio broadcast, other than "STANDARD" (Dolby/ etc.) in the "STANDARD" (Dolby/ DTS Surround). DTS Surround) mode. No sound • The surround mode is set to • Set to a surround playback is produced "STEREO" or "DIRECT". mode. from surround speakers. No sound is produced from surround back speaker. • The surround back speaker's • Check the setting and change it power amplifier is assigned to a as necessary. different channel. • Surround back speaker setting is • Set to something other than set to "None". "None". • Surround mode not set to a mode • Select a surround playback for 6.1- or 7.1-channel playback. mode. No sound is produced from subwoofer. • Subwoofer's power not turned • Turn on the subwoofer's power. on. • The "Subwoofer" setting at • Set to "Yes". "Speaker Setup" is set to "No". • The subwoofer is not properly connected. • Check the connections. • The subwoofer's volume is turned off. • Adjust the subwoofer's volume to an appropriate level. No test tones are • Surround mode not set to • Set to the "STANDARD"(Dolby/ produced when " S TA N D A R D " ( D o l b y / D T S DTS Surround) mode. main remote Surround). control unit's TEST button is pressed. DTS sound is not output. • DVD player's audio output setting • Set the DVD player. For details, is not set to bitstream. refer to the DVD player's operating instructions. • DVD player is not compatible • Use a DTS-compatible player. with DTS sound playback. • The AVR-1708's "Input Mode" • Set to the "Auto" or "DTS" setting is set to other than mode. "DTS". HDMI audio • The audio signal input to the signals are not HDMI input connector cannot be output from speakers. - played on the AVR-1708. Input the audio signal to the digital audio input connector or analog audio input connector. No sound is output from the monitor connected with HDMI connections. • HDMI input setting is improper. • Check the HDMI input setting. Page 30 30 27 23 29, 30 - 23 9 41 29 - - 35 10 25 GVideoH Symptom No picture appears. No picture appears with HDMI connections. Picture cannot be recorded. DVDs cannot be copied on a VCR. Cause Countermeasure • The connections between the • Check the connections. AVR-1708 and monitor are faulty. • The monitor's input setting is • Set properly. wrong. • The player is connected using the • High definition (1080i/720p) and component input connectors, the progressive (480p/576p) video monitor is connected using the signals are not down-converted. video (yellow) or S-Video output Set the player to interlace connectors. (480i/576i) signals. • The connections to the HDMI • Check the connections. connectors are faulty. • HDMI input setting is improper. • Check the HDMI input setting. • The HDMI format of the player • Match the HDMI format of the and monitor do not match. player and monitor. • Input source does not match • The video conversion function recorder's video connection does not work for the REC connector (video or S-Video). OUT connectors. Match the input source and recorder connections. • This is not a malfunction. Most - movie software includes copy prevention signals and cannot be copied. ENGLISH Page 10 ~ 17 - - 10 25 10 13 - 58 Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting