Denon 2105 Operating Instructions - Page 47

ENGLISH Multi-source playback [1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode) 1 Press the ZONE2/REC SELECT button. The display switches as follows each time the button is pressed. ZONE 2 / REC SELECT (Main unit) 2, 4 1 2 2 With "ZONE2 SOURCE" displayed, turn the FUNCTION knob and select the source you wish to record. FUNCTION (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. 4 To cancel, turn the function knob and select "SOURCE". FUNCTION (Main unit) Display 2 PHONO CD TUNER DVD / VDP TV / DBS ZONE2 VCR -1 -2 V.AUX CDR / TAPE ZONE2 SOURCE NOTES: • The signals of the source selected in the ZONE2 mode are also output from the VCR-1, VCR-2 and CDR/TAPE recording output terminals. • Digital signals are not output to the ZONE2 output jacks. [2] Remote control unit operations during multi-source playback (selecting the source) 1 Set the slide switch to "AUDIO" and "ZONE2". 2 (Remote control unit) 2 Press the ZONE2 "ON" button. To cancel the ZONE2 mode. Press the ZONE2 "OFF" button. (Remote control unit) 2 3 Press the input source button. • The ZONE2 source switches directly. 4 The output level of the ZONE 2 SPEAKER OUT terminals can be controlled using the 3 VOLUME + and - buttons on the remote control unit. 1 (Remote control unit) DEFAULT SETTING (ZONE2 VOLUME LEVEL) : - - - dB (MINIMUM) 5 When the ZONE2 SOURCE function is set to TUNER, the preset channel can be selected using the CHANNEL + and - buttons on the remote control unit. (This is only possible when the main unit in the ZONE2 mode.) (Remote control unit) OUTPUT SURROUND BACK ZONE 2 (Light) The main zone output can be turned on and off with the MAIN ON/OFF button. 5 1 4 47