Denon 3910 Owners Manual - Page 53

ENGLISH 12 USING THE VIDEO SETUP 2 The video output setting of the HDMI and the DVI-D connectors can be changed. 2 The video output setting of the PICTURE MODE, PROGRESSIVE MODE and ADJUST MODE also can be changed. ON / STANDBY DENON LINK AL 24 PLUS OPEN / CLOSE PLAY STOP STILL / PAUSE HDMI / DVI SELECT FORMAT VIDEO MODE SUPER AUDIO CD SETUP PURE DIRECT SELECT PUSH ENTER DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-3910 Display the setting mode 1 2 3, 4 ✽ The HDMI, DVI, 480P, 576P, 720P and 1080i indicators flash when the connection is being checked, then stop flashing, remaining lit, once the check is completed. 12 MENU STOP SKIP STILL/PAUSE PLAY A-B ZOOM PAGE SLOW/SEARCH URE DIR DIMMER TOP MENU BACK LIGHT ANGLE SUBTITLE SEARCH MODE CALL AUDIO DISPLAY POWER OFF SELECT HDMFIO/DRVMI AT NTSC/PAL /DPIRROECGTRAM CSDUSPEETRUAPUDIO CLOOSPEEN/ CLEAR POWER ON RETURN Press the HDMI/DVI SELECT button. • The modes described below will appear on the display. HDMI/DVI OFF (Factory default) No output signals from the HDMI and DVI-D HDMI / DVI SELECT FORMAT connectors. This mode is set to use the COMPONENT VIDEO OUT connector. HDMI Y Cb Cr Main unit 1 Outputs the component signals from the HDMI connector. HDMI/DVI HDMI RGB SELECT FORMAT Outputs the RGB signals from the HDMI connector. DVI Outputs the RGB signals from the DVI-D connector. ✽ The video signals are only output from one of the Remote control unit HDMI, DVI or progressive component video output connectors. Press the HDMI/DVI FORMAT button. • The modes described below will appear on the display. Select the item you wish to set and press the select knob to define it. 480P/576P (Factory default) Outputs the image from the HDMI or DVI-D connector at 480P or 576P. 720P HDMI / DVI SELECT FORMAT Outputs the image from the HDMI or DVI-D connector at 720P. 1080i 2 Outputs the image from the HDMI or DVI-D connector at 1080i. Main unit • When playing back a PAL-formatted disc, be sure to set the TV TYPE option to NTSC. (See pages 36, 37) HDMI/DVI SELECT FORMAT • The video or audio signals may be interrupted when the output setting mode is switched. • Depending on the TV you are using, if the TV's input is not set to HDMI or DVI, the HDMI or DVI OFF Remote control unit mode may be set. In this case, set the TV's input setting to HDMI or DVI before performing the DVI setup procedure. • Connect to an HDCP compatible display to view images with DVI connections. HDMI/DVI OFF HDMI Y Cb Cr HDMI R G B DVI 480P/576P 720P 1080i 53