Denon AVR 1507 Owners Manual - English - Page 26
Setting the Power Amplifier Assignment, Setting the Volume Control
UPC - 081757507134
View all Denon AVR 1507 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
ENGLISH System Setup Option Setup Setting the Volume Control Setting the Power Amplifier Assignment To suit your preference, a surround back channel's power amplifier can be assigned to the ZONE2. 1 Press F G to select "3. Op", then press ENTER. 2 Press F G to set. S.Back: The surround back speakers are used in MAIN ZONE. ZONE2: This mode assigns the surround back amplifier channels to provide ZONE2 speaker-level outputs from the surround back speaker terminals. 3 Press ENTER or H to enter the setting and switch to the Volume Control setting. 1 Option Setup 2 1 P.Amp S.Back This sets the volume level of output. 1 Press D H to select the item, then press F G to set. Volume Limit: Set the volume's upper limit. • 0 dB, -10 dB, -20 dB: The volume cannot be increased above the selected levels. • OFF: If you do not want to set a volume limit, select "OFF". In this case, the volume can be set to the AVR-1507's maximum volume (output) level of +18 dB, which is extremely loud. Power On Volume Level: • LAST: The volume set when the AVR-1507 was last used is stored in the memory and set when the power is turned on Mute): The volume is always muted when the power is turned on. • -80 dB ~ +18 dB: Set the volume level when the power is turned on. You can adjust the MAIN ZONE volume level within the range of -80 to +18 dB (and ZONE2 volume level within the range of -70 to +18 dB). Muting Level: Set the level of volume attenuation in the mute mode. • FULL: The volume is fully muted. • -40 dB, -20 dB: The volume is lowered 40 dB or 20 dB from the current level. 1 P.Amp ZONE2 2 Press ENTER or H to enter the setting and switch to the Auto Surround Mode setting. 3 2 Limit 0 d B 1 2 Limit -10dB 3 P.On L A S T 4 Mute F U L L 2 5 AutoSurr. ON System Setup 23 ENGLISH