Denon AVR-1611 Owners Manual - English - Page 52

Simple version Basic version Advanced version Speaker Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup. • If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select MultEQ, Dynamic EQ and Dynamic Volume (vpage 46, 47). • Manual Setup can be used without changing the settings. Please set if necessary. Setting items Amp Assign Set the speakers connected to this unit. Setting details Normal : Set when using 7.1-channel (Front/Center/Surround/Surround Back/Subwoofer) speakers. ZONE2 : Set for connecting the speakers for ZONE2 to the SURR. BACK/ AMP ASSIGN terminals. Front Height : Set for connecting the front height speakers to the SURR. BACK/AMP ASSIGN terminals. Front Bi-Amp : Set for connecting a tweeter of a front speaker to the SURR. BACK/AMP ASSIGN terminals and a woofer of the front speaker to the FRONT terminals. Front B : Set for connecting the second front speakers to the SURR. BACK/AMP ASSIGN terminals. In this case, make settings for "Front Speaker Setup" (vpage 51). Since "Amp Assign" of this unit is set to "ZONE2" by default, audio is not output from the surround back speakers. When using the surround back speakers with MAIN ZONE, change the "Amp Assign" setting to "Normal". Speaker Config. Front : Set the front speaker size. Select speaker configuration • Large : Use a large speaker that can adequately play back low and size (bass reproduction frequencies. capability). • Small : Use a small speaker that has inadequate playback capacity for NOTE low frequencies. Do not use the outward shape of the speaker to • When "Subwoofer" is set to "No", "Front" is automatically set to determine selection of a "Large". "Large" or "Small" speaker. • When "Front" is set to "Small", "Center", "Surround", "Surround Instead, use the frequencies Back" and "Front Height" can not be set to "Large". set in "Crossover Center : Set the presence and size of the center speaker. Frequency" (vpage 50) as • Large : Use a large speaker that can adequately play back low the standard for determining frequencies. bass reproduction capability. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when a center speaker is not connected. "Large" is not displayed when "Front" is set to "Small". Subwoofer : Set the presence of a subwoofer. • Yes : Use a subwoofer. • No : Select when a subwoofer is not connected. When "Front" is set to "Small", "Subwoofer" is automatically set to "Yes". Setting items Speaker Config. (Continued) ENGLISH Manual Setup Setting details Surround : Set the presence and size of the surround speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround speakers are not connected. • When "Surround" is set to "Large", "Surround Back" and "Front Height" can be set to "Large". • When "Surround" is set to "None", "Surround Back" and "Front Height" can automatically set to "None". S.Back : Set the presence, size and number of surround back speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the surround back speakers are not connected. • 2sp : Use two surround back speakers. • 1sp : Use only one surround back speaker. When you select this setting, connect the surround back speaker to the left (L) channel. Even when the "S.Back" setting is other than "None", sound may not be emitted from the surround back speaker, depending on the playback source. In this case, make "Surround Parameter" - "S.Back" setting other than "OFF" (vpage 45). NOTE When the "Amp Assign" setting (vpage 49) is other than "Normal", you cannot make the "S.Back" setting. Front Height : Set the presence and size of the front height speakers. • Large : Use a large speaker that can adequately play back low frequencies. • Small : Use a small speaker that has inadequate playback capacity for low frequencies. • None : Select when the front height speakers are not connected. NOTE When the "Amp Assign" setting (vpage 49) is other than "Front Height", you cannot make the "Front Height" setting. Information Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu 49